 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) HA-5002/883 Monolithic, Wideband, High Slew Rate, High Output Current Buffer Description The HA-5002/883 is a monolithic, wideband, high slew rate, high output current, buffer amplifier. Utilizing the advantages of the Harris Dielectric Isolation technologies, the HA-5002/883 current buffer offers 1300V/s slew rate typically and 1000V/s minimum with 110MHz of bandwidth. The 100mA minimum output current capability is enhanced by a 3 output impedance. The monolithic HA-5002/883 will replace the hybrid LH0002 with corresponding performance increases. These characteristics range from the 3M (typ) input impedance to the increased output voltage swing. Monolithic design technologies have allowed a more precise buffer to be developed with more than an order of magnitude smaller gain error. The voltage gain is 0.98 guaranteed minimum with a 1k load and 0.96 minimum with a 100 load. The HA-5002/883 will provide many present hybrid users with a higher degree of reliability and at the same time increase overall circuit performance. April 2002 Features * This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. * Voltage Gain (RL = 1k) . . . . . . . . . . . . . . . . . 0.98 (Min) 0.995 (Typ) (RL = 100) . . . . . . . . . . . . . . . . 0.96 (Min) 0.971 (Typ) * High Input Impedance . . . . . . . . . . . . . . . . . 1.5M (Min) 3M (Typ) * Low Output Impedance . . . . . . . . . . . . . . . . . . 5 (Max) 3 (Typ) * Very High Slew Rate . . . . . . . . . . . . . . . .1000V/s (Min) 1300V/s (Typ) * Wide Small Signal Bandwidth. . . . . . . . . 110MHz (Typ) * High Output Current . . . . . . . . . . . . . . . . . 100mA (Min) * High Pulsed Output Current . . . . . . . . . . . 400mA (Max) * Monolithic Dielectric Isolation Construction * Replaces Hybrid LH0002 Ordering Information PART NUMBER HA2-5002/883 HA4-5002/883 TEMPERATURE RANGE -55oC to +125oC -55oC to +125oC PACKAGE 8 Pin Can 20 Lead Ceramic LCC Applications * Line Driver * Data Acquisition * 110MHz Buffer * High Power Current Booster * High Power Current Source * Sample and Holds * Radar Cable Driver * Video Products Pinouts HA-5002/883 (CLCC) TOP VIEW OUT V1 + NC NC NC HA-5002/883 (METAL CAN) TOP VIEW IN 8 18 NC 17 V2 + 16 NC 15 NC 14 NC NC 3 4 OUT 5 NC V2 + 2 6 V2 V1 + 1 7 V1 - 3 NC V2 NC NC NC 4 5 6 7 8 2 1 20 19 9 10 11 12 13 NC IN NC V1 NC CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright (c) Intersil Americas Inc. 2002. All Rights Reserved Spec Number 1 511017-883 FN3705.1 HA-5002/883 Absolute Maximum Ratings Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . 44V Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . Equal to Supplies Peak Output Current (50ms On, 1s Off) . . . . . . . . . . . . . . . . . .400mA Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <4000V Lead Temperature (Soldering 10s). . . . . . . . . . . . . . . . . . . . +300oC Thermal Information Thermal Resistance JA JC Ceramic LCC Package . . . . . . . . . . . . . . 80oC/W 30oC/W Metal Can Package . . . . . . . . . . . . . . . . . 160oC/W 70oC/W Package Power Dissipation Limit at +75oC for TJ +175oC Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.54W Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 645mW Package Power Dissipation Derating Factor Above +75oC Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . 15.4mW/oC Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5mW/oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. : 1. JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details. Operating Conditions Operating Temperature Range. . . . . . . . . . . . . . . . -55oC to +125oC Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . 12V to 15V RL 100 TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 12V and 15V, RSOURCE = 50, CLOAD 10pF, VIN = 0V, Unless Otherwise Specified. LIMITS PARAMETERS Input Offset Voltage SYMBOL VIO1 CONDITIONS VSUP = 15V GROUP A SUBGROUPS 1 2, 3 VIO2 VSUP = 12V 1 2, 3 Input Bias Current IB1 VSUP = 15V, RS = 1k 1 2, 3 IB2 VSUP = 12V, RS = 1k 1 2, 3 Voltage Gain 1 +AV1 VSUP = 12V, RL = 1k, VIN = 10V VSUP = 12V, RL = 1k, VIN = -10V VSUP = 12V, RL = 100, VIN = 10V VSUP = 12V, RL = 100, VIN = -10V VSUP = 15V, RL = 100, VIN = 10V VSUP = 15V, RL = 100, VIN = -10V VSUP = 15V, RL = 1k, VIN = +10V VSUP = 15V, RL = 1k, VIN = -10V 1 2, 3 1 2, 3 1 TEMPERATURE +25 C +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC o MIN -20 -30 -20 -30 -7 -10 -7 MAX 20 30 20 30 7 10 7 10 - UNITS mV mV mV mV A A A A V/V V/V V/V V/V V/V +25oC +125 C, -55 C +25oC +125 C, -55 C +25oC +125oC, -55oC +25oC +25oC +25oC +25oC +25oC +125oC, -55oC +25oC +125 C, -55 C o o o o o o -10 0.98 0.98 0.98 0.98 0.96 -AV1 Voltage Gain 2 +AV2 -AV2 1 0.96 - V/V Voltage Gain 3 +AV3 -AV3 1 0.96 - V/V 1 0.96 - V/V Voltage Gain 4 +AV4 1 2, 3 1 2, 3 0.99 0.99 0.99 0.99 - V/V V/V V/V V/V -AV4 Spec Number 2 511017-883 HA-5002/883 TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPLY = 12V and 15V, RSOURCE = 50, CLOAD 10pF, VIN = 0V, Unless Otherwise Specified. LIMITS PARAMETERS Output Voltage Swing SYMBOL +VOUT1 CONDITIONS VSUP = 15V, RL = 100, VIN = +15V VSUP = 15V, RL = 100, VIN = -15V VSUP = 15V, RL = 1k, VIN = +15V VSUP = 15V, RL = 1k, VIN = -15V VSUP = 12V, RL = 1k, VIN = +12V VSUP = 12V, RL = 1k, VIN = -12V VSUP = 15V, VOUT = +10V VSUP = 15V, VOUT = -10V VSUP = 12V, VOUT = +10V VSUP = 12V, VOUT = -10V VSUP = 5V, V+ = +20V, V- = -15V, V+ = +10V, V- = -15V VSUP = 5V, V+ = +15V, V- = -20V, V+ = +15V, V- = -10V VSUP = 5V, V+ = +17V, V- = -12V, V+ = +7V, V- = -12V VSUP = 5V, V+ = +12V, V- = -17V, V+ = +12V, V- = -7V GROUP A SUBGROUPS 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 TEMPERATURE +25 C +125oC, -55oC +25oC +125oC, -55oC o MIN 10 10 10 10 - MAX -10 -10 -10 -10 -10 -10 -100 -100 -100 -100 - UNITS V V V V V V V V V V V V mA mA mA mA mA mA mA mA dB dB dB dB dB dB dB dB -VOUT1 +VOUT2 +25oC +125oC, -55oC +25oC +125 C, -55 C +25oC +125oC, -55oC +25oC +125 C, -55 C +25oC +125oC, -55oC +25 C +125oC, -55oC +25 C +125oC, -55oC +25 C +125oC, -55oC +25 C +125oC, -55oC +25oC +125oC, -55oC o o o o o o o o -VOUT2 10 10 100 100 100 100 54 54 54 54 54 54 54 +VOUT3 -VOUT3 Output Current +IOUT1 -IOUT1 +IOUT2 -IOUT2 Power Supply Rejection Ratio +PSRR1 -PSRR1 +PSRR2 +25oC +125oC, -55oC +25oC +125 C, -55 C o o -PSRR2 54 Spec Number 3 511017-883 HA-5002/883 TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPLY = 12V and 15V, RSOURCE = 50, CLOAD 10pF, VIN = 0V, Unless Otherwise Specified. LIMITS PARAMETERS Power Supply Current SYMBOL +ICC1 CONDITIONS VSUP = 15V, VOUT = 0V VSUP = 15V, VOUT = 0V VSUP = 12V, VOUT = 0V VSUP = 12V, VOUT = 0V GROUP A SUBGROUPS 1 2, 3 1 2, 3 1 2, 3 1 2, 3 TEMPERATURE +25 C +125oC, -55oC +25 C +125oC, -55oC +25 C +125oC, -55oC +25 C +125oC, -55oC o o o o MIN -10 -10 -10 -10 MAX 10 10 10 10 - UNITS mA mA mA mA mA mA mA mA -ICC1 +ICC2 -ICC2 TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS Table 2 Intentionally Left Blank. See AC Specifications in Table 3 TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS Device Characterized at: VSUPPLY = 15V or 12V, RLOAD = 1k, CLOAD 10pF, Unless Otherwise Specified. LIMITS PARAMETERS Input Resistance SYMBOL RIN1 RIN2 Slew Rate +SR1 CONDITIONS VSUP = 15V VSUP = 12V VSUP = 15V, VOUT = -5V to +5V VSUP = 15V, VOUT = +5V to -5V VSUP = 12V, VOUT = -5V to +5V VSUP = 12V, VOUT = +5V to -5V VSUP = 15V or 12V, VOUT = 0 to +500mV VSUP = 15V or 12V, VOUT = 0 to -500mV NOTES 1 1 1 TEMPERATURE +25oC +25oC +25oC +125oC, -55oC 1 +25oC +125oC, -55oC 1 +25oC +125oC, -55oC 1 +25oC +125oC, -55oC 1, 2 1, 2 TF 1, 2 1, 2 +25oC +125oC, -55oC +25oC +125oC, -55oC MIN 1.5 1.5 1000 1000 1000 1000 1000 1000 1000 1000 MAX 10 10 10 10 UNITS M M V/s V/s V/s V/s V/s V/s V/s V/s ns ns ns ns -SR1 +SR2 -SR2 Rise and Fall Time TR Spec Number 4 511017-883 HA-5002/883 TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Characterized at: VSUPPLY = 15V or 12V, RLOAD = 1k, CLOAD 10pF, Unless Otherwise Specified. LIMITS PARAMETERS Overshoot SYMBOL +OS CONDITIONS VSUP = 12V or 15V, VOUT = 0 to +500mV VSUP = 12V or 15V, VOUT = 0 to -500mV VSUP = 15V, VIN = 0V, IOUT = 0mA VSUP = 12V, VIN = 0V, IOUT = 0mA VSUP = 12V VSUP = 12V NOTES 1 TEMPERATURE +25oC +125oC, -55oC 1 +25oC +125oC, -55oC 1, 3 +25oC +125oC, -55oC 1, 3 +25oC +125oC, -55oC 1 1 +25oC +25oC MIN MAX 30 30 30 30 300 300 240 240 5 5 UNITS % % % % mW mW mW mW -OS Quiescent Power Consumption PC1 PC2 Output Resistance ROUT1 ROUT2 NOTES: 1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These parameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization based upon data from multiple production runs which reflect lot to lot and within lot variation. 2. Measured between 10% and 90% points. 3. Quiescent Power Consumption based upon Quiescent Supply Current test maximum. (No load on outputs.) TABLE 4. ELECTRICAL TEST REQUIREMENTS MIL-STD-883 TEST REQUIREMENTS Interim Electrical Parameters (Pre Burn-In) Final Electrical Test Parameters Group A Test Requirements Groups C and D Endpoints NOTE: 1. PDA applies to Subgroup 1 only. SUBGROUPS (SEE TABLE 1) 1 1 (Note 1), 2, 3 1, 2, 3 1 Spec Number 5 511017-883 HA-5002/883 Die Characteristics DIE DIMENSIONS: 81 x 80 x 19 mils 1 mils 2050 x 2030 x 483m 25.4m METALLIZATION: Type: Al, 1% Cu Thickness: 20kA 2kA GLASSIVATION: Type: Nitride Thickness: 7kA 0.7kA WORST CASE CURRENT DENSITY: 0.7 x 105 A/cm2 at 3.6mA SUBSTRATE POTENTIAL (Powered Up): V1TRANSISTOR COUNT: 27 PROCESS: Bipolar Dielectric Isolation Metallization Mask Layout HA-5002/883 V1IN V1- (ALT) V1+ (ALT) V2+ V2- V1+ OUT All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation 7585 Irvine Center Drive Suite 100 Irvine, CA 92618 TEL: (949) 341-7000 FAX: (949) 341-7123 Intersil Corporation 2401 Palm Bay Rd. Palm Bay, FL 32905 TEL: (321) 724-7000 FAX: (321) 724-7946 EUROPE Intersil Europe Sarl Ave. William Graisse, 3 1006 Lausanne Switzerland TEL: +41 21 6140560 FAX: +41 21 6140579 ASIA Intersil Corporation Unit 1804 18/F Guangdong Water Building 83 Austin Road TST, Kowloon Hong Kong TEL: +852 2723 6339 FAX: +852 2730 1433 Spec Number 6 511017-883 |
Price & Availability of HA2-5002883
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |